Lian Li Lancool III RGB Cabinet

Lian Li Lancool III RGB Cabinet

Features

• Mid-tower modular chassis for all kinds of configurations.
• Equipped with 4 × 140 PWM fans (ARGB or non-RGB).
• Featured airflow-optimized mesh structure and hinged side panels.
• Supports up to 420 radiators or 3 x 360 radiators and a maximum of 10 fans.
• Offers 12 storage drive mounting locations.
• Upgraded cable management solution for a clean build.

LANCOOL III RGB

LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.

Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan. Offering 7 colors and 8 lighting modes (the 8th mode is MB SYNC), the included ARGB controller can be operated via the front IO C and M buttons and can extend its control for 3 additional ARGB devices.

AVAILABLE IN– TWO COLORS, TWO MODELS

The LANCOOL III black features a premium hairline brushed aluminum element that looks as good as it feels, while the LANCOOL III white features a minimalist white powder coating. The tempered glass panel allows for showing off the internal components.

EXTREME AIRFLOW CRAFTMANSHIP

A fine mesh design has been implemented at the front, top, and bottom side panels of the LANCOOL III.

• Top and 2x Bottom Side Panels: The two bottom side panels provide sufficient airflow to efficiently cool the GPU when fans are installed above the PSU shroud.
• Front Panel: The 51% porosity offers ample direct fresh air intake.

HINGED PANELS ALL AROUND

The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives. The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle. The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached.

FLEXIBLE CONFIGURATION

With ample interior room, the LANCOOL III can offer different cooling and usage scenarios.

• AIR Cooling: With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.
• AIO Cooling: With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.
• Custom Water Cooling: With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination.

SPACIOUS COOLING SUPPORT

The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.

• Multi-way Front Fan/Radiator Bracket: The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need for the locking thumbscrews.
• Removable Top Fan Bracket: The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.
• 420mm Radiator Installation
• Modular PSU Shroud Bracket – Fan/ Pump/ SSD: The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” SSDs, or a pump/reservoir combos.
• Side Multi-Purpose Mounting Slots: Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.

EXTENSIVE STORAGE CAPACITY

Multiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.

• Adjustable Drive Cage: 2 adjustable drive cages (each for 2 x 3.5” HDDs or 2 x 2.5” SSDs) can be individually removed or adjusted.
• Toolless SSD tray: Two spring-loaded SDD trays located behind the motherboard tray allow for a toolless installation of the drives.
• Side SSD tray: The side-mounted SSD trays located inside the right PSU shroud panel can support up to 3 x 2.5” SSDs or can be removed to improve airflow.

COMPREHENSIVE CABLE MANAGEMENT

As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.

• 3 Layers Velcro Straps: Holds 3 different sets of cables separately.
• Routing Velcro Straps: Provides a clear path for cables such as the CPU 8pin, fan cables, USB cables…
• Layout for Fan Hubs: 3 fan controllers/ fan hub mounting locations are provided between the large Velcro straps, with an additional one at the removable plate behind the motherboard.
• Hinged Cover Doors: Magnetic, hinged, and removable cable cover doors hide cable clusters and provide easy access at the same time.
• Sliding Cable Routing Cover: By slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.

REVERSIBLE FRONT I/O

Optimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis.

• Light Color Button (C): 7 static colors.
• Light Mode Button (M):
  • 8 lighting effects.
  • 8th sync to motherboard or L-Connect.
  • Press 3 seconds to turn off the lighting.
• Audio
• Power Button
• Reset Button
• USB 3.0
• USB Type C

FRIENDLY PSU INSTALLATION

The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.

ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPU

A GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.

OPTIONAL VERTICAL GPU KIT

The O11D EVO Vertical GPU kit is compatible with LANCOOL III, offering adjustable clearance beneath the vertical GPU by installing it in different expansion slots.

• Mounted at the first slot for radiator and fan clearance.
• Mounted at second slot for fan clearance.
• Mounted at the third slot for large CPU tower cooler clearance.

OPTIONAL DUST FILTER KIT

A front, top, and left-side magnetic dust filter are offered to provide a higher level of dust filtration. Please note that the airflow will be impacted by the dust filters.